Kubikly

Room Redesign · by room · first redesign free

Redesign your bedroom from a photo

The bedroom is the room nobody else sees, which is why it is so often the last to be finished: a bed, a lamp on a chair, clothes on the other chair. Upload a photo of yours, keep the bed if it is a good one, and see the same room calm, layered and done.

Before: messy bedroom (original photo)
BeforeAfter
Messy bedroom to Scandinavian

Asked: “Clean this room up and make it Scandinavian. Keep the bed and the wooden nightstand.” · Clean & redesign · Scandinavian

The bed, the wooden nightstand, the rug, the dresser and the door stay where they were; the clutter is gone and the bedding, lamps and plants are new.

Original photo by Infrogmation of New Orleans, CC BY 2.0, via Wikimedia Commons. The “after” is an unretouched Kubikly redesign (AI-generated); not a customer photo.

Things you can ask for

  • “Clean this room up and make it Scandinavian. Keep the bed and the wooden nightstand.”
  • “Upholstered headboard, cream bedding and linen curtains to the floor”
  • “Boutique hotel feel: a dark wall behind the bed and wall lights on either side”
  • “Add storage for clothes without making the room feel smaller”
  • “Keep everything; just make the bedding cream and the walls a warm white”

Three things that make a bedroom feel finished

The headboard wall. The wall the bed stands against is the one you see from the door, so it carries the room. A headboard taller than the pillows, a painted or panelled section behind the bed, or one large piece of art centred above it gives the room a focal point.

Bedside light in layers. A lamp or wall light on each side at reading height, something soft elsewhere, and the overhead light kept for cleaning. A matching pair either side of the bed is the quickest way to make a bedroom look deliberate.

Textiles. A bedroom is mostly fabric, so layer it: a base of sheets in one colour, a duvet cover or quilt in a second tone, then texture from a wool throw or linen cushions. Curtains hung close to the ceiling and wider than the window make the window look larger and block more light when drawn.

How to get a good bedroom result

  • Photograph from the doorway or the corner opposite the bed, standing, in landscape, with the whole bed and the window in frame.
  • Do not tidy first if you want Clean & redesign: the mode exists to clear the clothes, bags and boxes for you.
  • Mark the bed Keep if you are keeping it, then the nightstands, the rug and the wardrobe one by one.
  • Turn the lamps on as well as using daylight, so the analysis can see into the corners.

Test the cheap changes first

In the example on this page the bed, the nightstand, the rug and the dresser were all kept. What changed was a cleared floor, new bedding, lamps and a few plants. That is typical: most bedrooms need less new furniture than people think. Start at the Budget level, where paint, textiles, lighting and decor do most of the work and what can be kept is kept, and only move to Mid-range or Premium if the room still does not feel right.

What it will not do

It will not tell you whether a king-size bed fits, because the image carries no measurements, and it will not move the window so the bed can go somewhere else. It designs what your photo shows; the wall behind the camera is not part of it.

Frequently asked

Can I keep my bed and change everything else?
Yes. Mark the bed Keep and choose Redesign or Full transformation. The spec panel shows the bed as kept and lists what else was removed or added.
Can it make a dark bedroom look lighter?
It can show the room with lighter walls, bedding and curtains and with more lamps. It cannot add a window; the windows stay as they are.
What happens to a built-in wardrobe?
Built-ins are part of the fixed architecture, so a built-in wardrobe stays where it is. You can ask for a different finish, such as painted doors.
Can I show my partner before deciding?
Yes. Download the image or share a before/after composite. Nothing is published unless you send it to someone.

Related